Optional Resistors http://makerbot.wikidot.com/forum/t-151695/optional-resistors Posts in the discussion thread "Optional Resistors" Wed, 15 Jul 2026 00:39:46 +0000 http://makerbot.wikidot.com/forum/t-151695#post-461354 Re: Optional Resistors http://makerbot.wikidot.com/forum/t-151695/optional-resistors#post-461354 Mon, 27 Apr 2009 13:49:46 +0000 mtlsguy123 316456 Hello. I emailed Zach Smith from Makerbot on 4/21 about R1 on the extruder board. He said LEAVE IT OUT !!

Correct, leave R16 out also.

]]> http://makerbot.wikidot.com/forum/t-151695#post-461319 Optional Resistors http://makerbot.wikidot.com/forum/t-151695/optional-resistors#post-461319 Mon, 27 Apr 2009 12:59:06 +0000 kparanya 316906 I would like to confirm that I did the right thing with the optional resistors on the extruder controller and the motherboard:

R1 180 ohm on the extruder board: Since the cupcake has a single extruder I included this resistor.

R16 180 ohm on the motherboard: Since I didn’t KNOW that I needed it I left it out

Can anyone confirm or deny that this is the correct thing to do for the cupcake? Thanks!

]]>