Plastruder MK3 Kit: Missing Parts? http://makerbot.wikidot.com/forum/t-153155/plastruder-mk3-kit:missing-parts Posts in the discussion thread "Plastruder MK3 Kit: Missing Parts?" Tue, 11 Aug 2026 23:58:59 +0000 http://makerbot.wikidot.com/forum/t-153155#post-482358 Re: Plastruder MK3 Kit: Missing Parts? http://makerbot.wikidot.com/forum/t-153155/plastruder-mk3-kit:missing-parts#post-482358 Mon, 18 May 2009 11:23:49 +0000 tamberg 317499 The missing parts just arrived by mail today.

Regards,
tamberg

]]> http://makerbot.wikidot.com/forum/t-153155#post-468598 Re: Plastruder MK3 Kit: Missing Parts? http://makerbot.wikidot.com/forum/t-153155/plastruder-mk3-kit:missing-parts#post-468598 Mon, 04 May 2009 20:33:07 +0000 mikevalstar 304271 yeah all that came in a bag inside the other bag for me… not the tape thou…
i guess they forgot that bag :(

]]> http://makerbot.wikidot.com/forum/t-153155#post-468004 Re: Plastruder MK3 Kit: Missing Parts? http://makerbot.wikidot.com/forum/t-153155/plastruder-mk3-kit:missing-parts#post-468004 Mon, 04 May 2009 11:10:52 +0000 tamberg 317499 I would say it's

Brass Heater Barrel 1
PTFE Barrel 1
Brass Nozzle 1
Retaining Washer 1
100K Thermistor 1
1k ohm resistor 2
6 inches of ceramic tape 1
5mm led red 2
31GA Nichrome Wire 1
Pinch wheel pulley 1
crimp-on ferrule 1

(confused the ceramic tape with kapton tape in the original post)

Regards,
tamberg

]]> http://makerbot.wikidot.com/forum/t-153155#post-467533 Re: Plastruder MK3 Kit: Missing Parts? http://makerbot.wikidot.com/forum/t-153155/plastruder-mk3-kit:missing-parts#post-467533 Sun, 03 May 2009 21:31:48 +0000 mikevalstar 304271 what parts specifically are you missing? i haven't opened the bag yet i'll give mine a looksee

]]> http://makerbot.wikidot.com/forum/t-153155#post-467399 Plastruder MK3 Kit: Missing Parts? http://makerbot.wikidot.com/forum/t-153155/plastruder-mk3-kit:missing-parts#post-467399 Sun, 03 May 2009 17:28:26 +0000 tamberg 317499 Hi, it seems there are quite a few parts missing from the Plastruder MK3 Kit included in my Cupcake CNC. There is no retainer washer, and almost none of the parts required for heater barrel assembly (except for the ceramic tape). Or did I miss something?

Regards,
tamberg

]]>