Printed a dozen objects and counting http://makerbot.wikidot.com/forum/t-156288/printed-a-dozen-objects-and-counting Posts in the discussion thread "Printed a dozen objects and counting" Tue, 11 Aug 2026 23:12:03 +0000 http://makerbot.wikidot.com/forum/t-156288#post-481824 Re: Printed a dozen objects and counting http://makerbot.wikidot.com/forum/t-156288/printed-a-dozen-objects-and-counting#post-481824 Sun, 17 May 2009 18:48:15 +0000 tamberg 317499 Very nice, thanks!

]]> http://makerbot.wikidot.com/forum/t-156288#post-481507 Printed a dozen objects and counting http://makerbot.wikidot.com/forum/t-156288/printed-a-dozen-objects-and-counting#post-481507 Sun, 17 May 2009 05:41:40 +0000 MechatronicsGuy 326797 Hi Everyone,

I've finally got my extruder working reliably (had to file the slot
down), and I'm now printing object after object. Hooray for the
makerbot!

I've done a half a dozen dodecahedrons, a set of tweezers, a makerbot
watch, idler pulleys and a few other things. It's almost time to start
drafting my own parts!

Cheers,
Gavin

If anyone's interested I've put up some info on my website:

Some photos of prints are here:
http://sites.google.com/site/mechatronicsguy/Makerbot

My build process and troubleshooting here:
http://sites.google.com/site/mechatronicsguy/makerbot-build

]]>