Thing-o-matic Y stage belt is too tight, I think. http://makerbot.wikidot.com/forum/t-294376/thing-o-matic-y-stage-belt-is-too-tight-i-think Posts in the discussion thread "Thing-o-matic Y stage belt is too tight, I think." - On assembly the belt is too tight almost binding. Sun, 07 Jun 2026 13:42:38 +0000 http://makerbot.wikidot.com/forum/t-294376#post-2404578 Re: Thing-o-matic Y stage belt is too tight, I think. http://makerbot.wikidot.com/forum/t-294376/thing-o-matic-y-stage-belt-is-too-tight-i-think#post-2404578 Mon, 09 Nov 2015 10:12:58 +0000 Channing45 2127644 Sometimes it becomes very difficult to deal with such kind of situation and it happens most of the time in business. I would like to tell you that first you try by changing your belt because some of the belt are come tight technical person know how to deal with the situation and they can manage by their situation also or if i say out of the company setup techniques.

]]> http://makerbot.wikidot.com/forum/t-294376#post-960237 Re: Thing-o-matic Y stage belt is too tight, I think. http://makerbot.wikidot.com/forum/t-294376/thing-o-matic-y-stage-belt-is-too-tight-i-think#post-960237 Tue, 28 Dec 2010 21:49:45 +0000 resken 660667 There is some help in the tech support area.

]]> http://makerbot.wikidot.com/forum/t-294376#post-960150 Thing-o-matic Y stage belt is too tight, I think. http://makerbot.wikidot.com/forum/t-294376/thing-o-matic-y-stage-belt-is-too-tight-i-think#post-960150 Tue, 28 Dec 2010 19:53:29 +0000 resken 660667 After assembly of the Y stage and self alignment tip, the belt is way too tight.
The motor can not be adjusted any looser due to the rod bearing bolt heads are stopping
the adjustment in that direction.

Does anybody have a solution for this problem? Or should I be concerned ?

]]>