Surface error please help http://makerbot.wikidot.com/forum/t-563789/surface-error-please-help Posts in the discussion thread "Surface error please help" Tue, 11 Aug 2026 23:26:32 +0000 http://makerbot.wikidot.com/forum/t-563789#post-1563904 Re: Surface error please help http://makerbot.wikidot.com/forum/t-563789/surface-error-please-help#post-1563904 Thu, 13 Sep 2012 21:42:47 +0000 dnewman 1271617 Hard to tell without seeing a picture. You may need to adjust the Jitter plugin in Skeinforge after first making sure that it is enabled/activated. It controls where the layer shift occurs when moving from one layer to the next. When it keeps on happening at or near the same spot, then ugliness can occur (e.g., something which looks like a zipper going up the side).

Dan

]]> http://makerbot.wikidot.com/forum/t-563789#post-1562756 Surface error please help http://makerbot.wikidot.com/forum/t-563789/surface-error-please-help#post-1562756 Wed, 12 Sep 2012 07:13:15 +0000 Steven Pfaff 1438908 Hey guys hope you can help me i only have this ugly surface one the side where the print started and in this mouth area of at any head I print. Do you maybe know a fix for that ? I use that settings for my Replicator
Infill : 0
Layer Height : 0.2
Extra Shells : 6
Feed Rate : 30
Travel Rate : 40
Temperature for the extruder : 225
Temperature for the plate : 115
As slicing profile I use the default Replicator slicing profile.

]]>