Talk about MakerBot
Questions? Problems? Random ideas? Post here and chat your heart out.
| Thread name | Started | Posts | Recent post |
|
having issues with replicatorG not connecting to firmware
|
by: 07 Aug 2012 23:25 |
27 |
by 28 Aug 2012 03:22 Jump! |
|
any who uses the 3 mm Makerbot filament, what is your experience?
|
by: 25 Aug 2012 16:51 |
2 |
by 26 Aug 2012 00:08 Jump! |
|
My heated build platform looses connection and shows 1024 degrees intermittantly. Never holds long enough to print.
|
by: 12 Aug 2012 01:00 |
4 |
by 18 Aug 2012 23:17 Jump! |
|
Z axis on Makerbot Thingomatic slides down while printing resulting in the print head travelling through the already printed material. I have tried reverting the firmware version to 3.0, tried each possible configuration for "Hold Z axis", tried increasing the steps per mm for the z axis, nothing seems to help.
|
by: 04 Aug 2012 17:26 |
5 |
by 18 Aug 2012 01:14 Jump! |
|
|
by: 12 Aug 2012 23:18 |
6 |
by 14 Aug 2012 15:50 Jump! |
|
|
by: 12 Aug 2012 14:29 |
9 |
by 13 Aug 2012 14:51 Jump! |
|
The v3.6 extruder board is built for thermocouples (polarized), Can I just plug in the thermisters and get it to work?
|
by: 07 Aug 2012 15:54 |
2 |
by 07 Aug 2012 19:31 Jump! |
|
|
by: 03 Aug 2012 21:49 |
6 |
by 06 Aug 2012 16:31 Jump! |
|
skeinforge won't open
|
by: 16 Jul 2012 02:51 |
7 |
by 06 Aug 2012 15:52 Jump! |
|
3.1 firmware seems to be causing issues with prints in the z axis
|
by: 07 Dec 2011 15:37 |
15 |
by 02 Aug 2012 21:12 Jump! |
|
what is Flow Rate Settings (float) = 4.47 mean?
|
by: 01 Aug 2012 02:54 |
3 |
by 01 Aug 2012 19:41 Jump! |
|
New Heated Build Platform - takes long time to reach temperature
|
by: 29 Jul 2012 01:10 |
3 |
by 31 Jul 2012 00:12 Jump! |
|
|
by: 03 Jul 2012 05:22 |
3 |
by 29 Jul 2012 18:22 Jump! |
|
Bottom 2 lines are tabbed over by 9 characters.
|
by: 20 Jun 2012 19:50 |
3 |
by 28 Jul 2012 21:26 Jump! |
|
What is the current state of the art software for driving a TOM.
|
by: 16 Jul 2012 13:06 |
7 |
by 26 Jul 2012 10:43 Jump! |
|
|
by: 24 Jul 2012 20:41 |
7 |
by 25 Jul 2012 20:07 Jump! |
|
Unsure how to move to SF47 for ToM w/Jetty firmware
|
by: 23 Jul 2012 07:44 |
2 |
by 24 Jul 2012 20:39 Jump! |
|
|
by: 04 Jul 2012 01:14 |
4 |
by 23 Jul 2012 10:58 Jump! |
|
|
by: 22 Jul 2012 07:09 |
2 |
by 22 Jul 2012 07:50 Jump! |
|
|
by: 21 Jul 2012 10:18 |
3 |
by 22 Jul 2012 06:15 Jump! |