avrdude Help

avrdude

samidget10 22 Jul 2009 22:38

when i go to install the bootloader i get an error message saying
java.io.IOException: hardware/tools/avr/bin/avrdude: not found
at java.lang.UNIXProcess.forkAndExec(Native Method)
at java.lang.UNIXProcess.<init>(UNIXProcess.java:52)
at java.lang.ProcessImpl.start(ProcessImpl.java:91)
at java.lang.ProcessBuilder.start(ProcessBuilder.java:451)
at java.lang.Runtime.exec(Runtime.java:591)
at java.lang.Runtime.exec(Runtime.java:464)
at processing.app.Uploader.executeUploadCommand(Uploader.java:123)
at processing.app.AvrdudeUploader.avrdude(AvrdudeUploader.java:170)
at processing.app.AvrdudeUploader.avrdude(AvrdudeUploader.java:135)
at processing.app.AvrdudeUploader.burnBootloader(AvrdudeUploader.java:116)
at processing.app.AvrdudeUploader.burnBootloader(AvrdudeUploader.java:80)
at processing.app.Editor$44.run(Editor.java:2209)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:190)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:176)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)

Does this mean that i do not have AVRdude installed?

Re: avrdude

samidget10 22 Jul 2009 23:24

Im pretty sure i have AVRdude installed though because when i plug it into terminal i get this

jmevanko$ avrdude
Usage: avrdude [options]
Options:
-p <partno> Required. Specify AVR device.
-b <baudrate> Override RS-232 baud rate.
-B <bitclock> Specify JTAG/STK500v2 bit clock period (us).
-C <config-file> Specify location of configuration file.
-c <programmer> Specify programmer type.
-D Disable auto erase for flash memory
-i <delay> ISP Clock Delay [in microseconds]
-P <port> Specify connection port.
-F Override invalid signature check.
-e Perform a chip erase.
-O Perform RC oscillator calibration (see AVR053).
-U <memtype>:r|w|v:<filename>[:format]
Memory operation specification.
Multiple -U options are allowed, each request
is performed in the order specified.
-n Do not write anything to the device.
-V Do not verify.
-u Disable safemode, default when running from a script.
-s Silent safemode operation, will not ask you if
fuses should be changed back.
-t Enter terminal mode.
-E <exitspec>[,<exitspec>] List programmer exit specifications.
-y Count # erase cycles in EEPROM.
-Y <number> Initialize erase cycle # in EEPROM.
-v Verbose output. -v -v for more.
-q Quell progress output. -q -q for less.
-? Display this usage.

avrdude project: <URL:http://savannah.nongnu.org/projects/avrdude>