I was wondering if anyone can point me in the right direction here…After upgrading to the Stepstruder Mk7 My Thing-o-matic works but seems to have acquired some sort of internal offset for where it believes center is.
The symptoms I am seeing:
When warming up for a print the platform places the print head about 2 inches to the left of the rubber wiper. Previously it would warm up nestled behind the wiper as expected. This offset seems to carry through printing as attempting to print the 3D knot example results in the print running off the right side of the platform (forcing me to manually stop it to avoid contact with the platform bolts)
I am looking for calibration info to try and fix this but all I am finding is info about the Z height…nothing for XY offset. Has anyone seen this specific problem before?
Thanks for any help!